▼ Menu

EY802

 
    
Extras ▼

 

The EY802 is a half wave EHT rectifier with a 6.3 Volt heater that is designed to operate at 20 kV. This suggests small monochrome TV sets or professional equipment such as Radar displays.
The Mullard logo is the later stylised M.
The bell anode with shield tray below.
The rectifier set against a metal ruler.
The cathode tube is located close to the centre of the anode bell.
Thanks to Mark Mallison for sending the image.
The thin glass tube envelope is 22 mm in diameter, and excluding the B9A base pins is 67 mm tall.
Reference: Datasheet. Type EY802 was first introduced in 1967.

 

Pin Connections
B9A
1
2
3
4
5
6
7
8
9
tc
h,k
h
ic
s,k,h
h
s,k,h
ic
h
s,k,h
a

 

Absolute Maximum Operating Conditions
Rectifier
Vh
Ah
Va
mAa
6.3
0.12
20,000
0.5
Thanks to Frank Philipse for supplying the above PDF datasheet.
Updated February 16, 2019.
shape:thin.glass.tube construction:all.glass type:rectifier.hw age:1950.1960 base:b9a heater:6.3v pins:9 pin:1.h.k pin:2.h pin:3.ic pin:4.s.k.h pin:5.h pin:6.s.k.h pin:7.ic pin:8.h pin:9.s.k.h pin:tc.a
Return to Main Index